I Got To Use My Router Today

It was a big handyman day at Muddled Headquarters today. Relatively speaking.

For one task I needed to cut some grooves in a couple of pieces of wood. I have the perfect tool for that — a very nice router. The thing is, I haven’t used this machine in well over a decade. So a chore that would take an actual handyman maybe fifteen minutes start to finish took me closer to two hours, stretched over two days. First, I had to go to the store to get the correct bit (after searching for and failing to come up with the correct bit in my storage bins). The shopping trip took longer than necessary because I did self check-out wrong. By the time I got home it was dark, and my workshop is the back patio.

This morning(ish) I was right back at it. I have no idea how many trips I made between the garage and the patio — for instance to change the bit on the router I realized one needs a large wrench. Into the garage I went to grab my inch-based set of wrenches, only to discover that they’re all too small. Back into the garage I went to grab all my plus-sized wrenches from where they hang in an orderly row. That made two trips, just to put the right bit into the router. Then there were trips for clamps and shims and scrap-lumber guides, and a special trip for my ruler-square thingie. Then bizz-bang-buzz I was done.

Putting the router away, I pushed aside the guide attachment that would have rendered much of the other fiddling moot.

But I made the grooves. There is something deeply satisfying about a high-precision cut, the clean square groove at just the right location. Making the cut is almost an anticlimax; getting the cut right happens long before the motor of the power tool starts whirring. Carpentry is in the things you do before the blade touches the wood.

7

2 thoughts on “I Got To Use My Router Today

    • I wish.

      But you know, I also wish the now-me could have a discussion about carpentry with him. Somewhere around the time I was maintaining an Alfa Romeo I learned the slow, patient approach to making things. Sanding wood is a form of meditation.

Leave a Reply to Andrew Cancel reply

Your email address will not be published. Required fields are marked *